Set up MultiNAT

  1. Open your browser and type in 192.168.1.1 to go to the router admin page
  2. Login with your router username and password. You can find them on the sticker underneath the removable settings card on back of your Wi-Fi Hub
  3. Select Internet Connectivity on the dashboard
  4. Ensure that you have the username and password that you were assigned entered in the Login and Password fields
  5. Click on one of the Home buttons
  6. Click on Access Control
  7. Click on the MultiNAT tab
  8. Click on the Enable switch
  9. Type in the IP address block you have been assigned. This will be of the form aaa.bbb.ccc.ddd/xx (CIDR notation)
  10. Click on the Apply button
  11. Now click on the WAN IP Assignation tab. Notice the first IP address in the block is reserved for the router
  12. Select the IP address of the internal server/device from the LAN Device drop-down list
  13. Select the Public IP address you wish to use from the Public IP address drop-down list
  14. Click on the Add button. The assignment is added to the table at the bottom of the page
  15. Now click on the Port Forwarding button associated with the assignment
  16. Scroll down the page to the Add Rule Manually section
  17. Select a service/protocol from the Service drop-down list. For example, you can select services/protocols such as HTTP, HTTPS, SMTP and FTP
  18. IMPORTANT: Leave the External Host field blank
  19. Type in the IP address of the internal server/device in the Internal Host text box
  20. Your protocol and internal and external ports will be selected for you
  21. Click on the Add button
  22. Click on the Apply button